Spitfire - Wrebbit Jigsaw Puzzle

Structurally the Spitfire was a straightforward design with a light alloy monocoque fuselage and a single spar wing with stressed-skin covering and fabric-covered control surfaces. The Spitfire was adapted from Reginald Mitchell's aesthetically pleasing 1925 F.7/30 design. To preserve the clean nose-cowling lines originally conceived by Mitchell, the radiator was located beneath the starboard wing with the smaller oil cooler causing some asymmetry beneath the port wing, and the carburetor air intake under the center fuselage. A DeHavilland two-blade wooden fixed-pitch propeller was employed by the prototype and the first Spitfire I's had the Airscrew Company's wooden fixed-pitch two-blade. Later a DeHavilland three-blade, two position propeller was adopted after trials on the first prototype. The new propeller gave a 5 mph increase in speed. In 1940 DeHavilland three-blade constant-speed propeller were substituted. Production Spitfires had a fixed tail wheel and triple ejector exhaust manifolds. The X80 HP Rolls-Royce Merlin II and later the Merlin III engine was installed.

3D Puzzles by Category

CAN'T FIND WHAT YOU'RE LOOKING FOR? CLICK HERE!!!